How does cwm work

As far as I am concerned it is a piece of crap. When I boot on Recovery mode, I get ClockworkMod, fine… but it keeps giving me these error messages :. Of course, my phone boots and gets into recovery mode, so the partitions are there somewhere. Haroon, you seem particularly tech savvy so maybe you have an idea? Or anyone else of course…. Please contact the ROM. What should I do? Please help! I have spice mi I want to install custom ROM on it.

Can you send me the link of any custom ROM which is available to download. Thanks in advance. I have Galaxy Gio , i upgraded from froyo to gingerbread, then rooted the device. My aim was to install applications to SDcard so i tried to create the partitions on SDcard.

I downloaded the ROM Manager and while i opened the application and selected memory size is MB and 0MB as swap size, it asked for reboot and it never turned on. Its dead, literally dead, wont show anything as if there is no battery in the cell.

Can anybody tell me how can i breathe again? I have a Dell Streak 7, the clockworkMod recovery v3. I have the custom honeystreak rom on the sdcard and renamed it to update. What should I do?? Should I flash clockwork recovery of some other phone model?? And great guide by the way.. I installed CMW and used it to load the tether update from teamblackhat. The update was not successful stuck on NV update 1 of 4… , so I have to do a battery pull. After reboot, phone is fine.

This happens after every recharging I do. Does CMW think that a previous update was not successful and that is why it keeps coming up and how do I stop this strange behavior? Dear Harun — First of all i would like to say thanks for such a wonderful and nicely explained above article. Just out of the curiosity i wanna know how a Mobile device goes to recovery mode?

How the bootloader loads recovery. How this command is interpreted and directs to load the receovery. Thanking you in advance.. When I reboot into recovery, it takes me to the first clockworkMod recovery screen, but when i select anything it takes me to a page with nothing on it but the clockworkMod symbol, i have a previously rooted optimus V. The os on it atm is VM and I need to go to VM but cannot because i cannot select any option.

Using the power button merely hides all the options and shows you just the ClockworkMod logo. You should therefore try using other hardware buttons to see if they work for selection. Hope it helps. I think I may be a little bit confused but I am willing to learn! You should therefore not require to install it from CWR each time. Thats a good guide. The better than I now. You are the author I ask that because I see that posted on other site? Off course than I will post your name as the author? What do you say about that?

Glad you liked the guide. Yes, I am the author. You are welcome to translate it and post it on the ZTE blog, provided you give us the credit and a link back to this original post. Is there an easy way to remove this image and re-flash it? I have gingerbread installed on my nook color it is awesome! However, I am a noob and want to try flashing I think that is the correct term another ROM on the nook color? The ROM I would like to flash is the original nook software and keeping the gingerbread too?

Is this an option or am I way off base? However, unlike most Android devices, Nook Color supports booting an operating system from the SD card as well, so you can choose to install Gingerbread on a separate SD card and use it whenever required. Some Googling on it should easily get you going. I just rooted my Droid 1 and downloaded CWM, looed at sum roms and decided to get one.

I am not sure what Class the original 2GB card was, no indication on card, but the new one is Class 4. Now, I know from lots of sources that there are myriad problems with SD cards, and there are variations relating to the actual phone, the card, etc.

So, I have decided to Format this card right from the off, as I have seen this elsewhere as a necessary preliminary step. There is a format function in CWR, and I am hoping that I will be able to format the new card there, without ever actually booting into the Android system. I have a complete back-up of all on the existing SD, which is FAT32, including the apps folder shown above. I am also new to this entire thing so bare with me please.

I found a site the lists detailed instructions on how to update my samsung continuum to the android 3. I do not want it to mess up my phone so have been asking everywhere possible if anyone knows about it but have gotten no response. You seem to know very well about all this, I hope you can help! Hi , Hope to find someone who could give me a tip or something. I just rooted my T-Mobile G2X yesterday for the first time.

As newbie seems i deleted some files besides the unwanted apps. At first i lost data service then i reset it. I did backup to clockworkmod app but i forgot to save on my laptop. Now i have internet service but i can not download any application and some other issues. How can i download apps now or is there any way i could get a factory data reset or what should i do? Any suggestion? I would really appreciate it cause T-mobile and LG didnt care about anything. There was; DL it; got a wacky!

Googled to this page. I assume this is the file that just DL… however, am a little terrified to run it because:. So, should I run it?

Will the unlock remain without issue? If you checked for a firmware update and installed it successfully, it must have removed ClockworkMod recovery from your phone and replaced it with the stock recovery.

Lastly, if you want ClockworkMod recovery back, you can easily install it with the ROM Manager method mentioned in this guide. Hope it helps…welcome to the wonderful albeit a bit complicated world of Android!

First of all thanks for being there to answer our questions and help us with getting more out andriod. Now i am trying to upgrade to a newer Coredroid Rom V6. My main concern is my data. Now i am new to this whole rooting and customizing android scene but i am usually good with computers and tech. It is possible to do that with Android, and here is how you should go about it: 1. Using Titanium Backup, make a backup of all your installed apps and their data.

You may skip system apps and their data. Connect your phone to your computer, mount the SD card and transfer all the content from the SD card that you want to save, to your computer, especially including the folder containing apps and data backed up by TitaniumBackup.

Sync your contacts, calendar entries etc. Most users have it set automatically by default anyway. Now download the ROM, reboot into recovery, wipe all data, cache and Dalvik cache, and feel free to flash the new ROM without the risk of losing your data and apps. Can be expained what format boot, system, data, cache, sdcard or sd-ext does exactly?

Wit hthis I mean, when choosing either one, what will stay and what will I be loosing? With explaining this above, the guide would be completed.

I ask this because many tutorials of custom roms explain me to do this without telling me if I loose apps, widgets, MSGs, etc, or not at all. That my friend, is a superb idea! Instead of further lengthening this guide by adding that information here, I am writing a new guide that will explain all about Android partitions, in detail. I am assuming once i use cmod to flash a new rom, that i would need to reinstall it from the market to use it again say in the case of a restore.

As the name suggests, it lets you erase the cache files on your device. The backup option lets you create a comprehensive backup of your Android phone or tablet. Mahesh has been obsessed with technology since he got his first gadget a decade or so ago. Over the last few years, he's written a number of tech articles on various online publications including but not limited to MakeTechEasier and Android AppStorm. Read Mahesh's Full Bio.

We hate spam too, unsubscribe at any time. Table of Contents. Subscribe on YouTube! Did you enjoy this tip? To prove that applicants have earned a masters degree, they must provide submission of:. No CWM exam is required. However, CWM professionals must demonstrate competence in the following one-dozen topic areas:.

CWM holders are additionally required to complete at least 15 hours of continuing education annually. A CWM typically assists retail investors with the following:. Career Advice. Financial Advisor. Estate Planning. Your Privacy Rights. To change or withdraw your consent choices for Investopedia. At any time, you can update your settings through the "EU Privacy" link at the bottom of any page. These choices will be signaled globally to our partners and will not affect browsing data.

We and our partners process data to: Actively scan device characteristics for identification. I Accept Show Purposes. Your Money. Personal Finance. Your Practice.